201 Stainless Steel Rod

201 Stainless Steel Rod

201 stainless steel rod The characteristic of 201 stainless steel rod is acid-resisting, alkali-resistance, high density, no bubbles by polishing, no pinhole and etc., It is high-quality material in the production of various straps and covers. Properties Tensile Strength:99,400 PSI Yield...
Product description

201 Stainless Steel Rod

The characteristic of 201 stainless steel rod is acid-resisting, alkali-resistance, high density, no bubbles by polishing, no pinhole and etc., It is high-quality material in the production of various straps and covers.


Properties

Tensile Strength: 99,400 PSI

Yield Strength: 42,400 PSI

Elongation: 56%

*These numbers are "Typical" properties and may not be required to meet this grade. Please check with us Representative if physical properties are required for your application.*


Typical Applications for 201 Stainless include

appliances

restaurant equipment

cooking utensils

sinks

automotive trim

windows and doors

railway cars

trailers

hose clamps


Chemical Composition(WT%)

C ≤ 0.15

Si ≤ 0.75

Mn: 5.5 to 7.50

Cr: 16.0 to 18.0

N ≤ 0.25

P ≤ 0.060

S ≤ 0.030

Ni: 0.8 to 1.2%

Cu: Half 0.8%  ,High 1.5%

The normal OD of 201 stainless steel rod is from 4mm to 100mm, the usual length is 4m and 6m.

Usually, it only takes 3 working days for us to make delivery if the products are ready in stock.

Of course, unusual size can also be customized according your request.


The Cu Composition in 201 Stainless Steel Rod

Generally, half Cu is between 0.75% and 0.9%, high Cu is between 1.5% and 1.8%. If the Cu ratio is higher, the material will be softer and the tensile properties will be better.


Comparison of Three Methods for Polishing 201 Stainless Steel Plates

1. Electrochemical Polishing

Its advantages are the mirror luster to maintain a long, stable process, less pollution, low cost, good corrosion resistance. Its disadvantage is high pollution prevention, processing equipment one-time investment, complex pieces to tooling, auxiliary electrodes, a large number of production also need cooling facilities. Suitable for mass production, mainly used in high-grade products, export products, has a tolerance product, its processing process is stable, easy to operate.

2. Chemical polishing

Its advantages are less investment in processing equipment, complex pieces can be thrown, fast, high efficiency, good corrosion resistance. Its disadvantage is poor brightness, gas overflow, need ventilation equipment, heating difficult. Suitable for processing small batches of complex parts and small parts brightness requirements are not high products.

3. Mechanical Polishing

After mechanical polishing, the leveling of 201 stainless steel plates is good and the brightness is high. But Hao Hing steel industry need to remind is that this method consumes a large labor intensity, relatively serious pollution, and complex parts can not finish processing, its luster can not guarantee consistent, gloss maintenance time is not long, stifleness, rust. Therefore, this method is mainly used for processing simple parts, medium and small products.

 

201 Polished Stainless Steel Rod

1.jpg

201 Stainless Steel Rod Black Rod

2.png

 


Hot Tags: 201 stainless steel rod, China, manufacturers, suppliers, wholesale, stock, price
Related Products
Feedback

Copyright © Jiangsu Shimaoyatai Stainless Steel Co.,Ltd All Rights Reserved.Tel: +8613511656218