Knowledge

Home > Knowledge > Content
Stainless steel plate selection method
Oct 20, 2017

The choice of stainless steel plate to consider the use of operating conditions, such as manual or automatic operation, hot press performance and type, the quality requirements of the pressed material such as hardness, gloss and so on. But also to consider the economic accounting, each time the new cast steel plate, requiring the production of a slow quality of the number of decorative panels.


In addition, the choice of steel plate of the most reasonable thickness, should consider its use of time, quality, stiffness, while taking into account the strength of the plate when the pressure requirements; thermal conductivity; pressure distribution, pressure plate format specifications.


If the thickness of steel is not enough, easy to bend, the potential will affect the production of decorative panels. If the thickness is too large, the steel plate is too heavy, not only to increase the cost of steel, but also to the operation to bring unnecessary difficulties. At the same time also consider the stainless steel plate processing or use should leave the margin. The thickness of the copper plate is not absolutely consistent, but strive to the same thickness of the same plate as consistent, generally medium size saw board, thickness tolerance of 0.05 to 2.1 mm. If the requirements are too strict, grinding costs will also increase. Generally, the tensile strength, the hardness of the steel plate, the greater the resistance to mechanical damage, the use of longer durability, but the grinding processing costs are relatively high.








Copyright © Jiangsu Shimaoyatai Stainless Steel Co.,Ltd All Rights Reserved.Tel: +8613511656218